Recommended for users who want to try high-end grease reasonably, this is a small-capacity test model. By reducing the volume of grease and replacing the container with a simple one, We set the price range for easy use. It provides very good heat transfer performance for overclocking. Since it does not contain silicon, It is very light and flexible and can be applied easily. In addition, it does not cause contact failure due to low molecular weight siloxane gas etc. A special spatula with thermal Grizzly logo is included for convenient application of grease.
Sale!
Thermal Paste
Thermal Grizzly Hydronaut – Conductive, High Performance Thermal Paste 1 Gram
Original price was: $12.99.$10.99Current price is: $10.99.
Weight | 1 g |
---|---|
Brand |
Share your thoughts!
Let us know what you think...
Only logged in customers who have purchased this product may leave a review. Log in now
MSG –
Scheint ganz gut sein
Hatte schon mehrere Wärmeleitpasten in Nutzung. Kann hier nur sagen, sie erfüllt ihren Zweck. Ob die besser als die MX oder ähnlichen sind, kann ich nicht sagen. Hatte diese nun ca 1 Jahr in Nutzung. Gut finde ich, das diese länger braucht zum Harttrocknen.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Brian Becerril Dominguez –
Gran opción para bajar temperaturas
Apliqué este producto en mi laptop DELL Inspiron 3505 que tiene un AMD Ryzen 5, a pesar de ser un procesador algo caliente, en especial mi equipo llegaba a los 100° sin hacer muchas tareas, al aplicar la pasta terminó el problema, bajaron las temperaturas a 60°, sin embargo, para equipos portátiles no recomiendo la pasta térmica Hydronaut, es mejor Kryonaut, debido a que Hydronaut es para disipaciones líquidas
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Stan –
I don’t include photos, since I haven’t done any. But anticipated better cooling than any other, as this one advertised as a champion in thermal pastes for AIO. But upon application and assembly, it showed higher temps than Thermalright TF7. Note. I am using thermalright processor bracket for Core I7 13700K and Lian Li GA II Trinity Performance was showing 95C under Cinebench R23, while with Thermalright TF7 (currently using) it shows maximum 85C (with ambient 29C).I will give it another try some time later.Update.It shows 85C overall, with lower temps (ambient 25C). Still could have been better. Considering this paste, as per other reviews, dries out (degrades) within 6 months, and has high temps (>=80C) intolerance, I won’t buy it ever again.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Stephen Shaw –
I can not say much else, for AIOs and Tower Coolers, this is the best, by far, with no direct competition.You may be told MX-4 is as good, it is not, I’ve done direct comparisons with CPUs and GPUs and this thermally is around 5% better, I’ve been using it on multiple devices since the date of purchase and have not had to re-paste, even though I run things is non ideal conditions at high thermal envelopes.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Wolf –
Stuff is pretty awesome. Have a 5950x with a water block. When using the thermal paste supplied with the block temps were high 70’s C. Replaced it with Hydronaut and now the temps never go above 70 C.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Ishathus –
aslo use PBO2 to set -30 for all cores and after tested on Cinebench R23 I got score 14814pts and maximum temperature at around 68.5 – 68.8°C.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Greg E. –
Thought I’d try this on a water cooled CPU. Thorough testing showed No Improvement over Arctic Cooler MX-4 paste at almost 2x the price.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Ryan –
I before this paste tried using some Noctura-DH15 on my 5800x3D with this 360mm AIO and the temps were still not in a range I was happy with during the summer (sometimes peaking at 90 degrees during intense game loads). I play a lot of ‘off meta’ games that often times have pretty hard usage of the CPU the biggest one being Path of Exile which just has loads of calculations going on.When I decided to go get some new paste, I decided to go with thermal grizzly just due to the amount of respect that has been put onto this product for quality. I was not disappointed purchasing this paste I seen a DRASTIC decrease in temps i’m talking about going from 87-90 degrees down to 78-82 degrees under load. This was during summer months of 21+ degrees C weather.Highly recommend this paste, I didnt have any weird issues as reported by others with the paste being a strange texture etc, went on easy. I spread it out using the application tip for the tube and had no issues.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Caroline –
Bought the 26 gram as for some reason it was a better deal at only $38. Worked great. Will post before and after picture of temps and this is on a laptop during a cpu stress test and im happy with the new temps, no longer throttling. Used grizzly hydronaught on cpu and gpu. Used k5 pro on everything else and (went on thick lol) also removed thermal pads and replaced with k5 pro. Super happy hope it lasts.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Ted McPherson –
This was used in an attempt to fix a nearly new Dell G3 15 laptop which was overheating. The factory applied heat sink compound was removed and replaced with the Grizzly Hydronaut compound. The compound was easy to apply and gave temperatures lower by about 4 to 8 deg C at the CPU (depending on the load). It did not completely solve the problem with overheating, but it helped.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal