|
|
|
|
|
|---|---|---|---|
Highest thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, assuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
Stéphane –
Fait le job
La pâte est facile à appliquer.Par contre difficile de connaitre l’efficacité réelle sans comparer avec d’autre pâtes.Je suis passé d’un processeur Intel à un AMD.Les processeurs AMD chauffent plus mais la température reste malgré tout raisonnable au repos.Grâce aux 20gr j’ai de quoi remplacer un grand nombre de processeurs.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Troia Pierre-Henri –
Ça n’a plus rien à voir !
Après le nettoyage de ma ps4 1206 et le remplacement des pads des puces de mémoire ainsi que le remplacement de la pâte thermique avec une qualité moyenne, le ventilateur fonctionnait toujours très rapidement au maximum malgré l’ajout de ventilateurs arrières connectés sur le port USB. Donc le bruit était assez conséquent.Depuis le remplacement du ventilateur (alors que l’original ne montrait aucun signe de vieillissement ou bruit de frottement) avec l’ElecGear, ainsi que le remplacement de la pâte thermique avec la Artic MX-4 sur la CPU:PLUS AUCUN BRUIT !!Franchement je n’y croyais pas, mais après deux heures de jeu (Spiderman), le ventilateur interne ne s’est toujours pas mis sur sa vitesse max. Les ventilateurs externes semblent suffisants pour maintenir la ps4 suffisamment froide.Après plusieurs essais (pad sur la CPU, diverses pâtes thermiques ou pad entre les éléments du “S” de fixation de la CPU sur le rail du refroidisseur), c’est la formule gagnante pour moi. Il ne me reste plus qu’à ajouter un régulateur externe de vitesse du ventilateur pour avoir la totalité des options de refroidissement possible.Je recommande donc ce produit sans réserve.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Bluebook1013 –
Best on market. Easy to spread and works great!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Fortune Fiderikumo –
Used it on mu CPU and GPU,Simply Amazing
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Jamie –
Used mx4 on my RTX 3080 repad.When using it on the VRAM and VRM’s more is less.. these cards are made with such imperfections that if there isn’t enough pressure or gap your card will not boot or will overheat and shut off. As for the CPU, works great better then NVIDIA stock paste.. all you need there is a grain of rice since spread out.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Ian Kendall –
For the amount you get it’s a very good deal than buying from the big box stores. Taste great too works awsome
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Jeremy –
For the price, you can’t beat it. Gets lots of paste
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
mk –
My goto paste, great price for a whole 20g tube. Don’t have to worry about re pasting with these as opposed to the more premium ‘high performance’ brand.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Wababaki –
thank you for making the most long lasting paste i switched to 40gram container as i spread it daily on my component even brand new stuff i remove the bad paste to replace with arctic mx-4
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Lain M –
20g of some of the best thermal paste on the market for this low of a price is a very good deal, unless you run a computer repair shop this much will last you a very, very long time and since it is still mx-4 the performance is really only bested by liquid metal thermal pastesIf you repair or open up lots of computers and computer parts often this is enough to be able to do it for quite a while without running out of thermal paste, just pair it with some thermal putty from AliExpress and you can repaste every tech item that you own, and also your friends items too
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal