Product Description
Efficient, in-house developed pump
We went to great lengths to develop the water pump. The result is greatly reduced humming and higher efficiency. Like the other components, the pump is also PWM controlled. This leads to a significantly lower noise level at low and typical loads, but also to much lower power consumption, with a maximum of of 0.7 W at no load, 2.1 W under normal load and a maximum of 3.4 W under full load for the entire AiO.
Premium class radiator
Premium class radiator
Unlike most other all-in-one liquid cooling manufacturers, we rely on 38 mm thick radiators with a high fin density. This means that a larger amount of water can be used in the circuit, and the cooling surface can be significantly increased.
Water has a much higher heat capacity than aluminum or copper. This leads to a slower and up to 5 ° C lower temperature increase in the temporary turbo mode of modern CPUs.
Smooth VRM fan
Small fans have a reputation for being particularly loud and not very durable. However, we have developed a quiet and durable diagonal fan especially for the Liquid Freezer II and are 100% convinced that this 40 mm fan is just as durable as our other case fans. In the unlikely event that it should fail, ARCTIC will send you a replacement free of charge and easily, without a need to replace the entire unit.
The fan is PWM-controlled and can cool your voltage transformers and the base area almost inaudibly by over 10 ° C. This is especially effective in overclocking scenarios, inadequate VRM cooling or in housings with poor airflow, thus permitting continuously high loads. If sufficient VRM cooling is available, it can be switched off at will.
High quality hoses with integrated cable management
The fiber-reinforced, long EPDM tubing of the Liquid Freezer II enables installation even in large cases and effectively prevents the cooling liquid from evaporating, so that you do not have to worry about refilling the compact water cooling system.
It also hides the cables of your radiator fans thanks to sophisticated cable management. So you only have to connect a plug to the mainboard, saving valuable time during installation. In the end, you won’t need to hide any more cables and your view is reduced to just the essentials.
Pump
Radiator
VRM fan
Cable management
Compatibility with LGA1700
The Liquid Freezer II 360 is compatible with Intel’s new Alder lake processors. Even if the socket and heat-spreader are larger compared to the predecessor, the CPU surface has been reduced and remains centered. The Liquid Freezer II cooler completely covers this area.
*Unfortunately, we cannot ensure that only compatible products are available for you to purchase on the open market. For this reason, we are supplying the required mounting kit free of charge to customers who submit proof of purchase of a processor with LGA1700 socket. Alternatively, you can purchase the mounting kit under the product designation “ARCTIC Intel LGA1700 Upgrade Kit – For Liquid Freezer II Series”.
Technical Specifications
Compatibility
Intel Socket: 1700 (please note the hint above!), 1200, 115X, 2011-3*, 2066* *Square ILM; AMD Socket: AM5, AM4; RAM Clearance: unlimited; Operating Ambient Temperature: 0 – 40 °C
Pump/Cold Plate
VRM Fan: 40 mm, 1000–3000 RPM (PWM controlled); Pump: 800–2000 RPM (PWM controlled); Power Consumption: 0,5 W – 2,7 W (Pump + VRM Fan); Cold Plate: Copper, Micro-Skived-Fins; Thermal Paste: MX-4 (0.8 g)
Fan
Fan: 3x ARCTIC P12 - 120 mm Fan; Fan Speed: 200–1800 RPM; Fan Bearing: Fluid Dynamic Bearing; Noise Level: 0.3 Sone; Current: 0.08 A/12 V DC; Airflow: 55.6 CFM; Static Pressure: 2.2 mm H2O; Connector: 4-pin-Connector
Size & Weight
Radiator: 398 x 120 x 38 mm; Pump (w/o tubes) 98 mm x 78 mm x 53 mm; Tube Diameter: Outer: 12.4 mm // Inner: 6.0 mm; Tube Length: 450 mm; Weight: 1687 g (Fan, Radiator, Pump, Tubes)
Tommy G –
Ascetic design, absolute performance. I’m not looking to be blown away by the colors or esthetics. This cooling unit gets the job done. I have 12900k on an Asus Z690-E mobo. The brackets had to be ordered separately (very normal as the socket is new). It is imperative you wait for the bracket for the lga 1700. Paste needs to be applied thoroughly and screws have to be tightened firmly for good contact. Also, there is a list of motherboards that require a new PCB cover that can be obtained on the arctic website. The item arrived very quickly during the holidays. No complaints and many cheers.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
StatsfX –
Best there isGreat AIO water cooler, have it installed on my 5950x. Installation is a breeze.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Vincent Labrecque –
Fast delivery, perfect solution for cooling. Very fast delivery , product new, would recommand.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Vrqt72st –
Like it. As my first water cooler it perform very well. Quite. Keeps cpu cool.One note on compatibility: it has issues with pair Corsair 5000D airflow and Asus z370-A II. It does not fit at the top due to PSU socket position. And when it does fit on the side, but there this no space for hdd cover.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Brettland –
Quiet and Cool. Impressed with easy installation and quiet operation. In 22.5c room, OC Ryzen 5950x idles at 32c. It’s so much quieter than my previous 240 fans and has no pump whine. This is a great AIO and would easily recommend. I thought the shape was a bit odd, but surprised how good it looked when installed.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Peter Vong –
Cools 5950x no problem 5950x, Crosshair 8 dark hero.idle at 35-38, gaming load sits at 55-60 degrees.Excellent product, would buy 10x over. The install was easy, no RGB, no BS, it just works.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Xvision2020 –
Great AIO cooler. Does what it was created to do, cooling
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Ray –
Great AIO that does what it’s supposed to. Installation on the Asus TUF x570 Pro MB is a bit wonky given the plates sit too close to the capacitors but not a big issue. Best part about it is the single wire for the pump and three fans. I got V4 so it has the updated kit for AMD motherboards.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
jimmy james –
This is the Best Liquid Cooler in 2021 for Top Notch Gaming PC. work perfectly for MB x570 pro wifi + 5800xidle temp around 34’c-40’cfull load 75’c-81’c almost no noise9.9/10 and no the mounting bracket do not touch the capacitors if you use the default backplate from AMD.If you have a CPU beast , i suggest you to use this Liquid Cooler. You wont regret it.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Carlos –
Resultado espectacular.Vengo de una Aio Corsair y está la supera costando solo la mitad de precio. Temperaturas en reposo por debajo de 30° y no supera los 60° a máxima carga.Facil instalación, solo decir que los tubos son algo largos.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
vMax65 –
Wow one of the best AIO’s period!I was highly impressed by this AIO. It is straightforward with no RGB (good or bad you choose) which is more than fine by me as really it is all about performance and boy does this perform at a price that is just stellar compared to other AIO’s…The AIO is extremely well made with a small fan to cool the VRM’s and it actually works with and is quiet but also can be disconnected. Also the cabling is to a bare minimum so no huge bundles of cable to manage but most importantly it performs at the highest level. This is probably due to the thicker radiator than normal which has a larger capacity to cool but be warned, check you case to make sure it will fit. Most AIO radiators are 28mm thick this one is 38mm thick!!! and it works to cool at low fan speeds extremely well.I have a 10700K overclocked to 5.1GHz for 24/7 use and even with Prime95 small FFT’s the cooling is just great… I have used other AIO’s in the past most notably Corsair AIO’s and they are great but this costs less and performs better.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Wrestleley Wong –
No screws neededYup pretty easy to install I just have to wedge it between motherboard and top of case. No screws needed. Very good cooling for this AIO.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Yvon R Houle –
FantasticA Fantastic Product at a Fantastic Price!!You will NOT be disappointed.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Putulik S. –
Only custom loop is better than thisArctic made a really good aio cooler
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Aden –
Bang for the BuckLiked that a thermal paste tube was included.Don’t like how LGA 1700 backplate isn’t included.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Philippe Parenteau –
Very goodOnly a single fan connector required to operate it!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal