Product Description
|
|
|
|
|
|---|---|---|---|
A-RGB for Full Colour ControlThe P12 PWM PST A-RGB has 12 digital A-RGB LEDs in the fan scar. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly via the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware. |
0dB Mode – Zero RPMThe speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time promises maximum performance when required. |
Optimised for high static pressureThe P12 PWM PST A-RGB operates with a focused airflow and a high static pressure. The fan thus promises extremely efficient cooling, even with increased air resistance, and is therefore suitable for use on heat sinks, radiators and filters. |
0 to 2000 RPM controlled via PWM PSTWith a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P12 PWM PST A-RGB can be controlled synchronously with all other fans. This reduces noise to a minimum while promising maximum cooling performance. |
General data
General Specifications
Fan Speed: 0-2000 RPM
Airflow: 48.8 CFM/ 82.91 m³/h
Static Pressure: 1.85 mm H₂O
Noise Level: 0.3 Sone
Operating Ambient Temperature: 0 – 40 °C
Fan & Electrical Fan Specifications
Fan Frame: Standard
Control Type: PWM PST
Connector: 4-Pin-Connector + 4-Pin-Socket
Fan Bearing: Fluid Dynamic Bearing
Typical Voltage: 12 V DC
Current: 0.11 A
Cable Length: 400 mm + 80 mm
RGB Specifications
Number of LEDs: 12 RGB LEDs
Typical Voltage: 5.0 V
Current: 0.4 A
Connector: 3-Pin 5V-DI-GND Connector + 3-Pin Socket
Size & Weight
- Length: 120 mm
- Width: 120 mm
- Height: 25 mm
- Weight: 131 g
Jamie –
I assembled a nice PC for my son from old used PC parts and a few WS2812B LED strips. I control the LEDs via a Wemos D1 mini, which is flashed with WLED. I was also able to control the ARCTIC P12 PWM PST with A-RGB via this, so that I can now play the same colors on all LEDs. This gives you a cost-effective solution that is completely a great. WLED even syncs with Philips HUE or other WLED instances. The ARCTIC P12 PWM is surprisingly quiet. Price performance is really great, there’s nothing to nag about.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Kim –
Good Excellent product quality, good noise level but that of 0db not to talk about 38 to 46 db.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Sami –
I brought the ARCTIC P12 PWM PST A-RGB 0dB (3 Pack) as a cheaper alternative to the more expensive fans from another brand that you see alot of in PC builds these days & i’m so pleased with them. They’re whisper quiet to the point that i’m glad they have RGB as i’d never even know my pc was still on sometimes.
Talking of RGB the led’s are nice & bright with good colour representation lighting up my case well. Build quality is great they seem very solid, i really like the built in anti vibration pads around the screw holes and the nice long cables with the ability to daisy chain them which is super handy and means i don’t need control boxes to set up multiple fans.
I have them set up with two in the front (intake) and one in the rear as an exhaust which is more than enough for my i5 10400 with stock cooler & 1050 ti gfx card. All in all really great fans.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
TVGuide145 –
have installed on a radiator > here I recommend push-pull for better cooling performance.
Are quiet and have a very good and bright color spectrum.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal